Vlan Status - ZyXEL Communications GS1350 Series User Manual

1
Vendor ID Based VLAN
2
Voice VLAN
3
MAC Based VLAN
If the packet matches a VLAN rule that has a higher priority, for example, an entry with weight 250 in the
vendor ID to VLAN mapping table, the Switch assigns the corresponding VLAN ID to the packet and
stops checking the subsequent VLAN rules.
9.1.2.3 Se le c t the VL AN T ype
Select a VLAN type in the
Basic Setting > Switch Setup > Select VLAN Type
Fig ure 97
Sta tic VL AN
Use a static VLAN to decide whether an incoming frame on a port should be
• sent to a VLAN group as normal depending on its VLAN tag.
• sent to a group whether it has a VLAN tag or not.
• blocked from a VLAN group regardless of its VLAN tag.
You can also tag all outgoing frames (that were previously untagged) from a port with the specified
VID.
9.2 VL AN Sta tus
Use this screen to view and search all static VLAN groups. Click
navigation panel to display the
Chapter 9 VLAN
>
Ba sic Se tting Switc h Se tup
screen as shown next.
VL AN Sta tus
GS1350 Series User's Guide
123
screen.
Adva nc e d Applic a tio n
> from the
VL AN