ZyXEL Communications GS1350 Series User Manual page 375

Table 193 Security > Access Control > Service Access Control (continued)
L ABEL DESC RIPT IO N
Login Timeout The Telnet or SSH server do not allow multiple user logins at the same time. Enter how many
seconds (from 30 to 300 seconds) a login session times out. After it times out you have to start
the login session again. Very long login session timeouts may have security risks.
For example, if User A attempts to connect to the Switch (via SSH), but during the login stage,
do not enter the user name and/or password, User B cannot connect to the Switch (via SSH)
before the
Apply Click
Apply
changes if it is turned off or loses power, so use the
save your changes to the non-volatile memory when you are done configuring.
Cancel Click
C a nc e l
Chapter 51 Security
for User A expires (default 150 seconds).
L o g in T im e o ut
to save your changes to the Switch's run-time memory. The Switch loses these
to begin configuring this screen afresh.
GS1350 Series User's Guide
375
link on the top navigation panel to
Sa ve