ZyXEL Communications GS1350 Series User Manual page 54

Table 8 Wizard > Basic > Step 2 Password (continued)
L ABEL DESC RIPT IO N
Get Community Enter the
GetNextrequests from the management station.
The
Set Community Enter the
the management station.
The
Trap Community Enter the
manager.
The
Previous Click
Next Click
Cancel Click
After clicking , the
Ne xt L ink Ag g re g a tio n
Wizard > Basic > Step 3 Link Aggregation
Fig ure 40
Each field is described in the following table.
Table 9 Wizard > Basic > Step 3 Link Aggregation
L ABEL DESC RIPT IO N
Link Aggregation
T1-Tx Click the arrows to add or delete icons located on the left to desired preference.
Select
Select
Chapter 4 Web Configurator
string, which is the password for the incoming Get- and
G e t C o m m unity
string is only used by SNMP managers using SNMP version 2c or lower.
G e t C o m m unity
string, which is the password for the incoming Set- requests from
Se t C o m m unity
string is only used by SNMP managers using SNMP version 2c or lower.
Se t C o m m unity
string, which is the password sent with each trap to the SNMP
T ra p C o m m unity
string is only used by SNMP managers using SNMP version 2c or lower.
T ra p C o m m unity
to show the previous screen.
Pre vio us
to show the next screen.
Ne xt
to exit this screen without saving.
C a nc e l
screen appears.
if the ports are configured as static members of a trunk group.
Sta tic
if the ports are configured to join a trunk group via LACP.
L AC P
GS1350 Series User's Guide
54