3
Attach the rubber feet to each corner on the bottom of the Switch. These rubber feet help protect the
Switch from shock or vibration and ensure space between devices when stacking.
Attaching Rubber Feet
Fig ure 6
4
Set the Switch on a smooth, level surface strong enough to support the weight of the Switch and the
connected cables. Make sure there is a power outlet nearby.
C a utio ns:
• Avoid stacking fanless Switches to prevent overheating.
• Ensure enough clearance around the Switch to allow air circulation for cooling.
• Do NOT remove the rubber feet as it provides space for air circulation.
2.3 Wa ll Mo unting
The Switch can be mounted on a wall (see
mounting on a concrete or brick wall.
2.3.1 Insta lla tio n Re q uire m e nts
• Distance above the floor: At least 1.8 m (5.9 feet)
• Distance between holes: 78 mm (3.071 inches)
• Two M4 screws and a #2 Philips screwdriver
• Two screw anchors (optional)
Chapter 2 Hardware Installation and Connection
Table 1 on page
GS1350 Series User's Guide
27
20). You may need screw anchors if