Port Utilization - ZyXEL Communications GS1350 Series User Manual

Table 160 Management > Port Status > DDMI > DDMI Details (continued)
L ABEL
Current
High Alarm
Threshold
High Warn
Threshold
Low Warn
Threshold
Low Alarm
Threshold
44.2.4 Po rt Utiliza tio n
This screen displays the percentage of actual transmitted or received frames on a port as a percentage
of the speed. To view port utilization, click
L ink
following screen. Alternatively, click
link in the
Q uic k L inks
link tab.
Utiliza tio n
Management > Port Status > Utilization
Fig ure 237
The following table describes the labels in this screen.
Table 161 Management > Port Status > Utilization
L ABEL
Port
Link
Tx kB/s
Tx Utilization%
Rx KB/s
Rx Utilization%
Chapter 44 Port Status
DESC RIPT IO N
This displays the current status for each monitored DDMI parameter.
This displays the high value alarm threshold for each monitored DDMI parameter. An alarm
signal is reported to the Switch if the monitored DDMI parameter reaches this value.
This displays the high value warning threshold for each monitored DDMI parameter. A warning
signal is reported to the Switch if the monitored DDMI parameter reaches this value.
This displays the low value warning threshold for each monitored DDMI parameter. A warning
signal is reported to the Switch if the monitored DDMI parameter reaches this value.
This displays the low value alarm threshold for each monitored DDMI parameter. An alarm
signal is reported to the Switch if the monitored DDMI parameter reaches this value.
Sta tus
section of the
Sta tus
DESC RIPT IO N
This identifies the Ethernet port.
This field displays the speed (either
duplex ( for full duplex). It also shows the cable type (
F
field displays if the port is not connected to any device.
Do wn
This field shows the transmission speed of data sent on this port in kilobytes per second.
This field shows the percentage of actual transmitted frames on this port as a percentage of the
Link speed.
This field shows the transmission speed of data received on this port in kilobytes per second.
This field shows the percentage of actual received frames on this port as a percentage of the
speed.
GS1350 Series User's Guide
>
Ma na g e m e nt Po rt Sta tus
from any Web Configurator screen and then the
screen to display the
Po rt Sta tus
for 10 Mbps,
10M 100M
C o ppe r
321
> to see the
Po rt Utiliza tio n
Po rt Sta tus
screen and then click the
for 100 Mbps, or for 1 Gbps) and the
1G
or ) for the combo ports. This
Fib e r
L ink