Configure A Static Vlan - ZyXEL Communications GS1350 Series User Manual

9.4 C o nfig ure a Sta tic VL AN
Use this screen to configure a static VLAN for the Switch. Click the
C o nfig ura tio n
Fig ure 101
The following table describes the related labels in this screen.
Table 50 Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup
L ABEL
ACTIVE
Name
VLAN Group ID
Port
*
screen to display the screen as shown next.
Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup
DESC RIPT IO N
Select this check box to activate the VLAN settings.
Enter a descriptive name for the VLAN group for identification purposes. This name consists of up
to 64 printable characters. Spaces are allowed.
Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.
Note: Do NOT add a VLAN ID that has been used in the
The port number identifies the port you are configuring.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
GS1350 Series User's Guide
Chapter 9 VLAN
126
link in the
Sta tic VL AN Se tup
Vo ic e VL AN Se tup
VL AN
.