ZyXEL Communications GS1350 Series User Manual page 65

Table 19 Navigation Panel Links (Surveillance Mode)
L INK DESC RIPT IO N
Summary This screen displays the Switch's general device information, connected ports, and used
power.
Quick Setup This link takes you to a screen where you can display the
and use the links to the
SYSTEM
System This link takes you to a screen that displays general system information.
Information
General Setup This link takes you to a screen where you can configure general identification information
about the Switch.
Cloud This screen displays a link to a screen where you can enable or disable the
Management
C e nte r Disc o ve ry
Control Center). Another link takes you to the
QR code containing the Switch's serial number and MAC address for handy registration of the
Switch at NCC.
PORT
Auto PD This screen allows you to enable and configure Auto PD Recovery on the Switch.
Recovery
For PoE models.
PoE Setup
This screen allows you to set priorities, PoE power-up settings and schedule so that the Switch is
able to reserve and allocate power to certain PDs.
Port Setup This screen allows you to configure settings for individual Switch ports.
SWITCHING
Broadcast Storm This link takes you to a screen to set up broadcast filters.
Control
Link Aggregation This link takes you to screens where you can logically aggregate physical links to form one
logical, higher-bandwidth link.
Loop Guard This link takes you to a screen where you can configure protection against network loops that
occur on the edge of your network.
VLAN This link takes you to screens where you can configure port-based or 802.1Q VLAN (depending
on what you configured in the
MAC based VLAN or a vendor ID based VLAN in these screens.
NETWORKING
IP Setup This screen allows you to configure the IP address and subnet mask (necessary for Switch
management) and set up to 64 IP routing domains.
ONVIF This screen allows you to configure a specific VLAN to run ONVIF.
SECURITY
Access Control
Logins This link takes you to a screen where you can change the system login password, as well as
configure up to four login details.
Remote This link takes you to a screen where you can specify a group of one or more "trusted
Management
computers" from which an administrator may use a service to manage the Switch.
SNMP This link takes you to screens where you can specify the SNMP version and community
(password) values, configure where to send SNMP traps from the Switch, enable loopguard/
errdisable/poe/linkup/linkdown/lldp/transceiver-ddm/storm-control on the Switch, specify the
types of SNMP traps that should be sent to each SNMP manager, and add/edit user
information.
Service This link takes you to a screen where you can decide what services you may use to access the
Access
Switch.
Control
Chapter 4 Web Configurator
,
IP Se tup Auto PD Re c o ve ry
feature. If it is enabled, you can have the Switch search for the NCC (Nebula
Switc h Se tup
GS1350 Series User's Guide
65
IP Addre ss Info rm a tio n
, ,
Po E Se tup Po rt Se tup
Ne b ula Switc h Re g istra tio n
menu). You can also configure a voice VLAN, a
of the Switch
, and screens.
O NVIF
Ne b ula C o ntro l
screen which has a