ZyXEL Communications GS1350 Series User Manual page 367

Security > Access Control > Remote Management
Fig ure 270
The following table describes the labels in this screen.
Table 186 Security > Access Control > Remote Management
L ABEL DESC RIPT IO N
Entry This is the client set index number. A "client set" is a group of one or more "trusted computers"
from which an administrator may use a service to manage the Switch.
Active Set this switch to
temporarily disable the set without deleting it.
Start Address Configure the IP address range of trusted computers from which you can manage this Switch.
End Address The Switch checks if the client IP address of a computer requesting a service or protocol matches
the range set here. The Switch immediately disconnects the session if it does not match.
Telnet/FTP/ Select services that may be used for managing the Switch from the specified trusted computers.
HTTP/ICMP/
SNMP/SSH/
HTTPS
Apply Click
Apply
changes if it is turned off or loses power, so use the
your changes to the non-volatile memory when you are done configuring.
Cancel Click
C a nc e l
Chapter 51 Security
to activate this secured client set. Clear the check box if you wish to
O N
to save your changes to the Switch's run-time memory. The Switch loses these
to begin configuring this screen afresh.
GS1350 Series User's Guide
367
link on the top navigation panel to save
Sa ve