ZyXEL Communications GS1350 Series User Manual page 175

The following table describes the labels in this screen.
Table 77 Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping > IGMP Snooping VLAN
L ABEL DESC RIPT IO N
Mode Select
automatically.
Select
VLANs that you specify below.
In either
The Switch drops any IGMP control messages which do not belong to these 16 VLANs.
You must also enable IGMP snooping in the
first.
Apply Click
changes if it is turned off or loses power, so use the
save your changes to the non-volatile memory when you are done configuring.
Cancel Click
VLAN Use this section of the screen to add VLANs upon which the Switch is to perform IGMP
snooping.
Name Enter the descriptive name of the VLAN for identification purposes.
VID Enter the ID of a static VLAN; the valid range is between 1 and 4094.
Add Click this to create a new entry or to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the
changes to the non-volatile memory when you are done configuring.
Cancel Click
Clear Click
Index This is the index number of the IGMP snooping VLAN entry in the table. Click on an index
number to view more details or change the settings.
Name This field displays the descriptive name for this VLAN group.
VID This field displays the ID number of the VLAN group.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete Check the entries that you want to remove, then click the
Cancel Click
Chapter 21 Multicast
to have the Switch learn multicast group membership information of any VLANs
a uto
to have the Switch only learn multicast group membership information of the
fixe d
or mode, the Switch can learn up to 16 VLANs.
a uto fixe d
to save your changes to the Switch's run-time memory. The Switch loses these
Apply
to begin configuring this screen afresh.
C a nc e l
to reset the fields to your previous configuration.
C a nc e l
to reset the fields to the factory defaults.
C le a r
to clear the check boxes.
C a nc e l
GS1350 Series User's Guide
175
>
Multic a st IPv4 Multic a st
link on the top navigation panel to
Sa ve
link on the top navigation panel to save your
Sa ve
De le te
> screen
IG MP Sno o ping
button.