Configure Snmp User - ZyXEL Communications GS1350 Series User Manual

Table 190 Security > Access Control > SNMP > Trap Group Port (continued)
L ABEL
*
Active
Apply
Cancel
51.7 C o nfig ure SNMP Use r
From the
SNMP
screen to view SNMP users for authentication with managers using SNMP v3. An SNMP user is an SNMP
manager.
Fig ure 275
The following table describes the labels in this screen.
Table 191 Security > Access Control > SNMP > User Information
L ABEL
Index
Username
Security Level
Authentication
Privacy
Group
Add
Edit
Delete
Click or
Add
authentication with managers using SNMP v3 and associate them to SNMP groups.
Chapter 51 Security
DESC RIPT IO N
Settings in this row apply to all ports.
Use this row only if you want to make some of the settings the same for all ports. Use this row
first to set the common settings and then make adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
Set this switch to
O N
Set this switch to
O FF
Click to save your changes to the Switch's run-time memory. The Switch loses these
Apply
changes if it is turned off or loses power, so use the
save your changes to the non-volatile memory when you are done configuring.
Click to begin configuring this screen afresh.
C a nc e l
screen, click
Use r Info rm a tio n
Security > Access Control > SNMP > User Information
DESC RIPT IO N
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
This is a read-only number identifying a login account on the Switch. Click on an index number
to view more details and edit an existing account.
This field displays the username of a login account on the Switch.
This field displays whether you want to implement authentication and/or encryption for SNMP
communication with this user.
This field displays the authentication algorithm used for SNMP communication with this user.
This field displays the encryption method used for SNMP communication with this user.
This field displays the SNMP group to which this user belongs.
Click this button to create new SNMP users for authentication with managers.
Click this button to configure SNMP users for authentication with managers.
Click this button to remove the selected entry from the summary table.
button to open the following screen. Use this screen to create or edit SNMP users for
Edit
GS1350 Series User's Guide
to enable the trap type of SNMP traps on this port.
to disable the sending of SNMP traps on this port.
to view the screen as shown. Use the
372
link on the top navigation panel to
Sa ve
Use r Info rm a tio n