Web Configurator Layout - ZyXEL Communications GS1350 Series User Manual

Wizard > QoS > QoS Setting
Fig ure 46
Each field is described in the following table.
Table 15 Wizard > QoS > QoS Setting
L ABEL
QoS Setting
Select all ports
High
Medium
Low
Finish
Cancel
4.5 We b C o nfig ura to r L a yo ut
This guide uses GS1350-6HP screens as an example. The screens may very slightly for different models.
Chapter 4 Web Configurator
DESC RIPT IO N
to apply settings on all ports.
Se le c t a ll po rts
You can select a port by clicking it.
Select ports and click the
Hig h
The port's IEEE 802.1p priority level will be set to 5. Use the
adjust the value.
Select ports and click the
Me dium
The port's IEEE 802.1p priority level will be set to 3. Use the
adjust the value.
Select ports and click the
L o w
The port's IEEE 802.1p priority level will be set to 1. Use the
adjust the value.
Review the information and click
Click to exit this screen without saving.
C a nc e l
GS1350 Series User's Guide
60
button, so they will have high priority.
Ba sic Se tting > Po rt Se tup
button and, so they will have medium priority.
Ba sic Se tting > Po rt Se tup
button, so they will have low priority.
Ba sic Se tting > Po rt Se tup
to create the task.
Finish
screen to
screen to
screen to