Configure Dhcpv4 Relay - ZyXEL Communications GS1350 Series User Manual

Tutorial: Add Tag for Frames Received on Port 2
Fig ure 63
11 Click the
Sa ve
permanently.
6.3.3 C o nfig ure DHC Pv4 Re la y
Follow the steps below to enable DHCP relay on the Switch and allow the Switch to add relay agent
information (such as the VLAN ID) to DHCP requests.
1
Click
IP Applic a tio n
2
Select the
Ac tive
3
Enter the DHCP server's IP address (192.168.2.3 in this example) in the
4
Select
de fa ult1
5
Click
Apply
Tutorial: Set DHCP Server and Relay Information
Fig ure 64
6
Click the
Sa ve
permanently.
7
The DHCP server can then assign a specific IP address based on the DHCP request.
link in the upper right corner of the Web Configurator to save your configuration
> >
DHC P DHC Pv4
check box.
or in the
de fa ult2 O ptio n 82 Pro file
to save your changes back to the run-time memory.
link in the upper right corner of the Web Configurator to save your configuration
GS1350 Series User's Guide
Chapter 6 Tutorials
and then the link to open the
G lo b a l
field.
80
screen.
DHC P Re la y
field.
Re m o te DHC P Se rve r 1