ZyXEL Communications GS1350 Series User Manual page 180

Advanced Application > AAA > AAA Setup
Fig ure 134
The following table describes the labels in this screen.
Table 79 Advanced Application > AAA > AAA Setup
L ABEL DESC RIPT IO N
Authentication Use this section to specify the methods used to authenticate users accessing the Switch.
Privilege Enable These fields specify which database the Switch should use (first, second and third) to
authenticate access privilege level for administrator accounts (users for Switch management).
Configure the access privilege of accounts via commands (See the CLI Reference Guide) for
authentication. The
lo c a l
you have set up the corresponding database correctly first.
You can specify up to two methods for the Switch to authenticate the access privilege level of
administrators. The Switch checks the methods in the order you configure them (first
and then
Switch to check another source for access privilege level specify it in the
Select
Select
Chapter 22 AAA
is an external server. Before you specify the priority, make sure
RADIUS
). You must configure the settings in the
Me tho d 2
to have the Switch check the access privilege configured for local authentication.
lo c a l
to have the Switch check the access privilege via the external server.
ra dius
GS1350 Series User's Guide
180
Me tho d 1
field. If you want the
Me tho d 1
field.
Me tho d 2
,