ZyXEL Communications GS1350 Series User Manual page 317

Port Status > Port Details
Fig ure 234
The following table describes the labels in this screen.
Table 158 Port Status: Port Details
L ABEL DESC RIPT IO N
Port Info
Port NO. This field displays the port number you are viewing.
Name This field displays the name of the port.
Link This field displays the speed (either
duplex (
F
combo ports. This field displays
State If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port. See
13.1 on page 144
If STP is disabled, this field displays
When LACP (Link Aggregation Control Protocol) and STP are in blocking state, it displays
Chapter 44 Port Status
10M
for full duplex or for half duplex). It also shows the cable type (
H
Do wn
for more information.
FO RWARDING
GS1350 Series User's Guide
317
for 10 Mbps, for 100 Mbps, or
100M
if the port is not connected to any device.
if the link is up, otherwise, it displays
for 1 Gbps) and the
1G
or ) for the
C o ppe r Fib e r
Section
.
ST O P
.
Blo c king