ZyXEL Communications GS1350 Series User Manual page 309

Management > ARP Table
Fig ure 229
The following table describes the labels in this screen.
Table 153 Management > ARP Table
L ABEL DESC RIPT IO N
Condition Specify how you want the Switch to remove ARP entries when you click
Select
All
Select
IP Addre ss
specified IP address.
Select
Po rt
Flush Click
Flush
Cancel Click
C a nc e l
Index This is the ARP table entry number.
IP Address This is the IP address of a device connected to a Switch port with the corresponding MAC address
below.
MAC Address This is the MAC address of the device with the corresponding IP address above.
VID This field displays the VLAN to which the device belongs.
Port This field displays the port to which the device connects.
management IP address.
Age(s) This field displays how long (in seconds) an entry can still remain in the ARP table before it ages out
and needs to be relearned. This shows
Type This shows whether the IP address is dynamic (learned by the Switch) or static (manually
configured in the
Chapter 40 ARP Table
to remove all of the dynamic entries from the ARP table.
and enter an IP address to remove the dynamic entries learned with the
and enter a port number to remove the dynamic entries learned on the specified port.
to remove the ARP entries according to the condition you specified.
to return the fields to the factory defaults.
>
Ba sic Se tting IP Se tup
GS1350 Series User's Guide
309
means this IP address is the Switch's
C PU
for a static entry.
0
or >
IP Applic a tio n ARP Se tup
.
Flush
> screen).
Sta tic ARP