Interface Setup - ZyXEL Communications GS1350 Series User Manual

Table 35 Basic Setting > PoE Setup (continued)
L ABEL
Apply
Cancel
8.9 Inte rfa c e Se tup
An IPv6 address is configured on a per-interface basis. The interface can be a physical interface (for
example, an Ethernet port) or a virtual interface (for example, a VLAN). The Switch supports the VLAN
interface type for IPv6 at the time of writing.
Use this screen to set IPv6 interfaces on which you can configure an IPv6 address to access and
manage the Switch. Click
configuration screen.
Basic Setting > Interface Setup
Fig ure 82
The following table describes the labels in this screen.
Table 36 Basic Setting > Interface Setup
L ABEL
Interface Type
Interface ID
Add
Cancel
Index
Interface Type
Interface ID
Chapter 8 Basic Setting
DESC RIPT IO N
Click to save your changes to the Switch's run-time memory. The Switch loses these
Apply
changes if it is turned off or loses power, so use the
your changes to the non-volatile memory when you are done configuring.
Click to begin configuring this screen afresh.
C a nc e l
>
Ba sic Se tting
DESC RIPT IO N
Select the type of IPv6 interface for which you want to configure. The Switch supports the VLAN
interface type for IPv6 at the time of writing.
Specify a unique identification number (from 1 to 4094) for the interface.
To have IPv6 function properly, you should configure a static VLAN with the same ID number in the
>
Adva nc e d Applic a tio n VL AN
Click this to create a new entry.
This saves your changes to the Switch's run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the
to the non-volatile memory when you are done configuring.
Click to reset the fields to your previous configuration.
C a nc e l
This field displays the index number of an entry.
This field displays the type of interface.
This field displays the identification number of the interface.
GS1350 Series User's Guide
Sa ve
in the navigation panel to display the
Inte rfa c e Se tup
screens.
link on the top navigation panel to save your changes
Sa ve
107
link on the top navigation panel to save