ZyXEL Communications GS1350 Series User Manual page 50

ZON Utility Screen
Fig ure 36
1
6
Select a device and then use the icons to perform actions. Some functions may not be available for
your devices.
Note: You must know the selected device admin password before taking actions on the
device using the ZON utility icons.
Password Prompt
Fig ure 37
The following table describes the icons numbered from left to right in the ZON Utility screen.
Table 5 ZON Utility Icons
IC O N
1 IP Configuration
2 Renew IP Address
3 Reboot Device
4 Reset Configuration to
Default
5 Locator LED
6 Web GUI
7 Firmware Upgrade
Chapter 4 Web Configurator
2 3 5
4
DESC RIPT IO N
Change the selected device's IP address.
Update a DHCP-assigned dynamic IP address.
Use this icon to restart the selected devices. This may be useful when troubleshooting
or upgrading new firmware.
Use this icon to reload the factory-default configuration file. This means that you will
lose all previous configurations.
Use this icon to locate the selected device by causing its
Use this to access the selected device Web Configurator from your browser. You will
need a user name and password to log in.
Use this icon to upgrade new firmware to selected devices of the same model. Make
sure you have downloaded the firmware from the Zyxel website to your computer and
unzipped it in advance.
GS1350 Series User's Guide
50
8
6 9
7
10 11
12
13
LED to blink.
L o c a to r