Table 145 Management > Diagnostic (continued)
L ABEL
DESC RIPT IO N
Pair status
: The physical connection between the wire-pair is okay.
O k
O pe n
Sho rt
Unkno wn
Unsuppo rte d
Cable length
This displays the total length of the Ethernet cable that is connected to the port when the
Pa ir sta tus
This shows
This shows
Distance to
This displays the distance between the port and the location where the cable is open or
fault
shorted.
This shows
This shows
Locator LED
Enter a time interval (in minutes) and click
between several devices in a rack.
The default time interval is 30 minutes.
Click
: There is no physical connection (an open circuit detected) between the wire-pair.
: There is an short circuit detected between the wire-pair.
: The Switch failed to run cable diagnostics on the cable connected this port.
: The port is a fiber port or it is not active.
is
and the Switch chipset supports this feature.
O k
if the
is
N/ A
Pa ir sta tus
if the Switch chipset does not support to show the cable length.
Unsuppo rte d
if the
is
N/ A
Pa ir sta tus
if the Switch chipset does not support to show the distance.
Unsuppo rte d
to have the Switch terminate the blinking locater LED.
Sto p
GS1350 Series User's Guide
294
or
. Check the
O pe n
Sho rt
Dista nc e to fa ult
.
O k
to show the actual location of the Switch
Blink
.