Ipv6 Global Address Setup - ZyXEL Communications GS1350 Series User Manual

Table 42 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Link-Local Address Setup (continued)
L ABEL
Apply
Cancel
Clear
Index
Interface
IPv6 Link-Local
Address
IPv6 Default
Gateway
8.10.7 IPv6 G lo b a l Addre ss Se tup
Use this screen to configure the interface's IPv6 global address. Click the link next to
in the
Se tup
Basic Setting > IPv6 > IPv6 Configuration > IPv6 Global Address Setup
Fig ure 89
The following table describes the labels in this screen.
Table 43 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Global Address Setup
L ABEL
Domain Name
Server 1/2
Apply
Cancel
Interface
Chapter 8 Basic Setting
DESC RIPT IO N
Click to save your changes to the Switch's run-time memory. The Switch loses these
Apply
changes if it is turned off or loses power, so use the
your changes to the non-volatile memory when you are done configuring.
Click to begin configuring this screen afresh.
C a nc e l
Click to reset the fields to the factory defaults.
C le a r
This is the interface index number. Click on an index number to change the settings.
This is the name of the IPv6 interface you created.
This is the static IPv6 link-local address for the interface.
This is the default gateway IPv6 address for the interface.
screen to display the screen as shown next.
IPv6 C o nfig ura tio n
DESC RIPT IO N
Enter a domain name server IPv6 address in order to be able to use a domain name instead of an
IP address.
Click to save your changes to the Switch's run-time memory. The Switch loses these
Apply
changes if it is turned off or loses power, so use the
your changes to the non-volatile memory when you are done configuring.
Click this to reset the
Do m a in Na m e Se rve r
Select the IPv6 interface you want to configure.
GS1350 Series User's Guide
link on the top navigation panel to save
Sa ve
link on the top navigation panel to save
Sa ve
values in this screen to their last-saved values.
114
IPv6 G lo b a l Addre ss