Chapter6 Utility Package (Gx Configurator-Pt); Utility Package Functions - Mitsubishi MELSEC-Q Series User Manual

6
UTILITY PACKAGE (GX Configurator-PT)
CHAPTER6
The QD72P3C3 utility package (GX Configurator-PT) is software designed to make initial
setting, auto refresh setting, monitor and others of the QD72P3C3 using dedicated
screens, without being conscious of the I/O signals and buffer memory.
Use the utility package together with GX Developer (SW4D5C-GPPW-E or later).
6.1

Utility Package Functions

The following table shows the functions of the utility package.
Function
Makes the initial setting for each axis to operate the QD72P3C3.
Sets the values of the items where the initial setting is required.
[Setting items]
•Parameter
•OPR data
Initial setting •Positioning data
•Counter function parameter
(The initially set data are registered to programmable controller CPU parameters and
automatically written to the QD72P3C3 when the programmable controller CPU
changes to the RUN status.)
Sets the QD72P3C3 buffer memory to be automatically refreshed.
[Auto refresh target buffer memory]
•Current feed value
•Current speed
•Count value
Auto refresh •Axis operation status
setting •Axis/CH error code
•Axis/CH warning code
(The values stored in the QD72P3C3 buffer memory with auto refresh setting are
automatically read when the programmable controller CPU executes the END
instruction.)
Monitors/tests the buffer memories and I/O signals of the QD72P3C3.
•Axis monitor/test
•OPR monitor
Monitor/Test
•Counter function monitor/test
•X/Y monitor
•ACC/DEC time calculation function
6
- 1 6.1 Utility Package Functions
UTILITY PACKAGE (GX Configurator-PT)
Description Reference
Section 6.4
Section 6.5
Section 6.6