Mitsubishi MELSEC-Q Series User Manual page 59

4
DATA USED FOR POSITIONING CONTROL
Monitor data
Monitor data
( Md.1 to Md.8 )
Control data
Axis control data
( Cd.1 to Cd. 7 )
How to set "setting data"
Setting item
Parameter
JOG data
Positioning data
Intelligent function module
switch
POINT
Data related to the operations of the running
axes (e.g. the current positions, speeds,
error status, and warning status) are monitored
for each axis.
(Storage location: QD72P3C3 buffer memory)
Operation-related settings are made and control
such as speed change during operation is performed.
(Storage location: QD72P3C3 buffer memory)
Means
Sequence program
* Initial setting is made to the intelligent function module parameters of the QCPU.
(1) Create "setting data" for each axis.
(2) The "setting data" parameters have determined default values, and have been
set to the default values before shipment from the factory. (Leave the
parameters for unused axes at the default values.)
(3) The "setting data" set in the QD72P3C3 buffer memory are not backed up. All
data are initialized at power-ON of the system or reset of the programmable
controller CPU.
4.1.1 Parameters and data required for control
GX Configurator-PT GX Developer
*
(Initial setting )
*
(Initial setting )
: Cannot be set.
4.1 Data Types
1
2
3
4
5
: Can be set.
6
7
8
4
- 2