Mitsubishi MELSEC-Q Series User Manual page 262

15
TROUBLESHOOTING
Error
code Error name
(decimal)
Out of creep speed
914
setting range
Out of ACC/DEC
915 time at OPR setting
range
Out of current feed
value, count value
simultaneous
923
change function
selection setting
range
Out of coincidence
924 detection setting
range
Coincidence
detection function/
925 ring counter
function setting
error
15
15.2 Error and Warning Descriptions
- 15
15.2.1 Error code list
Description
The setting value of the "
Pr.14
speed" is out of the setting range.
The setting value of the "
Pr.14
speed" is higher than the "
Pr.13
speed".
The setting value of the "
Pr.14
speed" is less than pulse unit.
The setting value of the "
Pr.15
time at OPR" is out of the setting range.
The setting value of the "
Pr.9
feed value, count value simultaneous
change selection" is out of the setting
range.
The setting value of the
" Coincidence detection setting" is
Pr.18
out of the setting range.
Ring counter is set for the counter format of
the intelligent function module switch
setting, which is set by GX Developer.
When ring counter is set for the counter
format, the " Coincidence detection
Pr.18
setting" is set to "1: Coincidence detection
requested".
Creep
Creep
OPR
Creep
ACC/DEC
Current
The module READY signal (X0) does not turn ON.
Operation at error