Mitsubishi MELSEC-Q Series User Manual page 116

6
UTILITY PACKAGE (GX Configurator-PT)
GX Configrator-PT
Programmable
controller CPU
A
6
- 7 6.3 Utility Package Operation
6.3.1 Common utility package operations
Steps 1) to 3) shown in Figure 6.1 are performed as follows:
1) From GX Developer, select:
[Project] [Open project] / [Save] / [Save as]
2) On the intelligent function module selection screen of the utility, select:
[Intelligent function module parameter]
parameters]
3) From GX Developer, select:
[Online] [Read from PLC] / [Write to PLC]
parameters"
Alternatively, from the intelligent function module selection screen of the utility,
select:
[Online] [Read from PLC] / [Write to PLC]
(b) Text files
A text file can be created by clicking the
initial setting, Auto refresh setting, or Monitor/Test screen. The text files can be
utilized to create user documents.
GX Developer/
Project
A
A: Intelligent function module parameters
B: Data saved by "Make text file"
Figure 6.1 Correlation chart for data created with the utility package
[Open parameters] / [Save
Make text file
Disk
Project
A
B
"Intelligent function module
button on the
Personal computer