Mitsubishi MELSEC-Q Series User Manual page 232

13
COMMON FUNCTION
13.3 External I/O Signal Monitor Function
This function monitors the module information, external I/O signal information, and
intelligent function module switch setting status on the screen displayed by clicking the "H/
W Information" button on the [Module's Detailed Information] screen, which can be
displayed from the [System Monitor] screen of GX Developer (SW7D5C-GPPW-E or
later).
[Setting procedure]
[Diagnostics]
Information...]
[H/W LED Information]
The following information is displayed at "H/W LED Information" on the [H/W Information]
screen.
RUN
ERR.
ZERO1
ZERO2
ZERO3
DOG1
DOG2
DOG3
FLS1
FLS2
FLS3
RLS1
RLS2
RLS3
13
- 3 13.3 External I/O Signal Monitor Function
[System monitor]
Item Signal name
"RUN" LED of the QD72P3C3
"ERR." LED of the QD72P3C3
Zero signal of Axis 1
Zero signal of Axis 2
Zero signal of Axis 3
Near-point dog signal of Axis 1
Near-point dog signal of Axis 2
Near-point dog signal of Axis 3
Upper limit signal of Axis 1
Upper limit signal of Axis 2
Upper limit signal of Axis 3
Lower limit signal of Axis 1
Lower limit signal of Axis 2
Lower limit signal of Axis 3
select "QD72P3C3"
.
0: The LED is OFF.
1: The LED is ON or flashing.
[Module's Detailed
Value
0: OFF, 1: ON