Appendix 7 Connection Examples With Servo Amplifiers Manufactured By Sanyo Denki - Mitsubishi MELSEC-Q Series User Manual

APPENDICES
Appendix 7 Connection Examples with Servo Amplifiers
Manufactured by SANYO DENKI CO., LTD.
(1) Connection example of QD72P2C3 and R series
Remark
*1: The logic of each I/O terminal can be changed by the intelligent function
*2: For wiring or shield of each signal line of the servo amplifier side other than
*3: This indicates the distance between the QD72P3C3 and R series.
Appendix 7 Connection Examples with Servo Amplifiers Manufactured by SANYO DENKI CO., LTD.
Within 2m*3
Near-point dog
Upper limit
Lower limit
24VDC
module switch setting (refer to Section 5.6). (The above example assumes
that all terminals are set to the negative logic.)
In addition, the above example is for connecting to Axis 1. (For the pin layout
when connecting to Axes 2 or 3, refer to "Section 3.5.2 Signal layout for
external device connector".)
mentioned above, refer to the manual for servo amplifier.
R series*2
App
- 16
9
10
11
12
13
14
15