Mitsubishi MELSEC-Q Series User Manual page 264

15
TROUBLESHOOTING
Error
code Error name
(decimal)
Out of count value
926 selection at OPR
setting range
Out of ring counter
927 upper limit value
setting range
Out of software
stroke limit upper
928
limit value setting
range
Out of software
stroke limit lower
929
limit value setting
range
Out of positioning
930 range upper limit
value setting range
15
15.2 Error and Warning Descriptions
- 17
15.2.1 Error code list
Description
The setting value of the "
Pr.19
value selection at OPR" is out of the setting
range.
The setting value of the "
Pr.16
counter upper limit value" is out of the
setting range.
The setting value of the "
Pr.1
stroke limit upper limit value" is out of the
setting range.
The setting value of the "
Pr.2
stroke limit lower limit value" is out of the
setting range.
The setting value of the " Positioning
Pr.17
range upper limit value" is out of the setting
range.
Count
Ring
The module READY signal (X0) does not turn ON.
Software
Software
Operation at error