Mitsubishi MELSEC-Q Series User Manual page 105

5
PROCEDURES AND SETTINGS BEFORE
OPERATION
(2) Operating procedure
Set the switches on the [I/O assignment] tab in the [PLC Parameter] screen of GX
Developer.
(a) [I/O assignment] tab
(b) [Switch setting for I/O and intelligent function module] screen
POINT
Set the following to the slot to which the QD72P3C3 is mounted.
[Type]: Select [Intelli].
[Model name]: Input the model of the module.
[Points]: Select [32points].
[Start XY]: Input the start I/O number of the QD72P3C3.
Switch setting
Click the button on the [I/O assignment] tab to display the screen
below and set the switches from 1 to 3.
Entering the values in hexadecimal make the setting easier.
Change [Input format] to [HEX.] and enter values.
The values set on the [I/O assignment] tab in the [PLC Parameter] screen can be
checked on the [Module's Detailed Information] screen displayed from the
[System Monitor] screen of GX Developer. For details, refer to Section 12.3.
5.6 Intelligent Function Module Switch Setting
1
2
3
4
5
6
7
8
5
- 17