Utility Package (Gx Configurator-Ti); Utility Package Functions - Mitsubishi Q64RD User Manual

5 UTILITY PACKAGE (GX Configurator-TI)

5 UTILITY PACKAGE (GX Configurator-TI)

5.1 Utility Package Functions

Table 5.1 shows a list of the utility package functions.
Table 5.1 Utility Package (GX Configurator-TI) Function List
Function
(1) Make initial setting for operating the Q64RD channel-by-channel.
Set the values of the items which require initial setting.
• Conversion Enable/Disable Setting
• Sampling Process/Average Process
Designation
• Time/Number of Times Designation
• Average Time/Average Number of Times Setting
Initial setting • Warning Output Enable/Disable Setting
• Setting Range
• Warning Output Lower Lower Limit Value
(0.001Degree ( C) Units)
• Warning Output Lower Upper Limit Value
(0.001Degree ( C) Units)
(2) The data for which initial setting has been completed is registered in the parameters for the PLC
CPU, and automatically written to the Q64RD when the PLC CPU changes to the RUN status.
(1) Set the automatically refreshed Q64RD buffer memory channel-by-channel.
• A/D Conversion Completed Flag
• CH.
(0.1Degree ( C) Units)
Automatic refresh
• Error Code
• Setting Range
(2) The values stored in the Q64RD buffer memory where automatic refresh setting was made are
automatically read when the END instruction of the PLC CPU is executed.
5 - 1
Description
Temperature Measurement Value
• Warning Output Upper Lower Limit Value
(0.001Degree ( C) Units)
• Warning Output Upper Upper Limit Value
(0.001Degree ( C) Units)
• Scaling Range Lower Limit Value
(0.001Degree ( C) Units)
• Scaling Range Upper Limit Value
(0.001Degree ( C) Units)
• Scaling Width Lower Limit Value
• Scaling Width Upper Limit Value
• Warning Output Flag
• Disconnection Detection Flag
• CH. Scaling Value
• CH. Temperature Measurement Value
(0.001Degree ( C) Units)
MELSEC-Q
Reference
section
Section 5.4
5
Section 5.5
5 - 1