Mitsubishi MELSEC-Q Series User Manual page 260

15
TROUBLESHOOTING
Error
code Error name
(decimal)
Out of deviation
counter clear signal
907
output time setting
range
Out of OPR method
910
setting range
Out of OPR
911 direction setting
range
Out of OP address
912
setting range
Out of OPR speed
913
setting range
15
15.2 Error and Warning Descriptions
- 13
15.2.1 Error code list
Description
The setting value of the "
Pr.7
counter clear signal output time" is out of
the setting range.
The setting value of the "
Pr.10
method" is out of the setting range.
The setting value of the "
Pr.11
direction" is out of the setting range.
The setting value of the "
Pr.12
address" is out of the setting range.
The setting of the " OP address" is
Pr.12
out of the positioning range when using the
ring counter.
When the " Count value selection at
Pr.19
OPR" is set to "1: OP address set to count
value" for the ring counter, the setting of the
" OP address" is out of the count
Pr.12
range.
The setting value of the "
Pr.13
speed" is out of the setting range.
The setting value of the "
Pr.13
speed" is lower than the "
Pr.14
speed".
The setting value of the "
Pr.13
speed" exceeds the " Speed limit
Pr.4
value".
Deviation
OPR
OPR
OP
The module READY signal (X0) does not turn ON.
OPR
OPR
Creep
OPR
Operation at error