Table of Contents
Advertisement
6 UTILITY PACKAGE (GX Configurator-DN)
6 UTILITY PACKAGE (GX CONFIGURATOR-DN)
6.1 Functions of the Utility Package
Table 6.1 lists the functions of the utility package (GX Configurator-DN).
Table 6.1 Utility package (GX Configurator-DN) function list
Function
(1)
Sets the QJ71DN91's buffer memory that refreshes automatically.
•
Master Function Communication Status
•
Master Function For Error Information
•
Bus Error Counter
•
Bus Off Counter
Auto refresh
•
Each Node Configuration Status
•
Each Node Communication Status
•
Each Node Obstacle Status
•
Down Node Detection Disable Status
•
Present Link Scan Time
(2)
The values stored in the QJ71DN91's buffer memory for which auto refresh has been set will
automatically be read when the END instruction of the PLC CPU is executed.
Monitors/tests the buffer memory and I/O signals of the QJ71DN91. In addition, auto configuration and
parameter backup can be performed.
•
Model Name Display
•
Node Number
•
Mode Switch Number
•
Bus Error Counter
•
Bus Off Counter
•
H/W Test Item Display Area
•
H/W Test Result Storing Area
•
Master Function Communication Status
Monitor/test
•
Master Function For Error Information
•
Present Link Scan Time
•
Minimum Link Scan Time
•
Maximum Link Scan Time
•
Slave Function Communication Status
•
Slave Function For Error Information
•
X/Y Monitor/Test
•
Parameter Area Monitor/Test
•
Save Parameter To Flash ROM
•
Each Node Configuration Status Monitor
Flash ROM
Edits the data to be set in the flash ROM offline.
setting
6 - 1
Description
•
Minimum Link Scan Time
•
Maximum Link Scan Time
•
Slave Function Communication Status
•
Slave Function For Error Information
•
Master Function For IO Address Area
•
Master Function Receive Data
•
Master Function Transmit Data
•
Slave Function Receive Data
•
Slave Function Transmit Data
•
Each Node Communication Status Monitor
•
Each Node Obstacle Status Monitor
•
Down Node Detection Disable Status
•
Message Communication Area Monitor/Test
•
Master Function For IO Address Area Monitor
•
Master Function Receive Data Monitor
•
Master Function Transmit Data Monitor/Test
•
Slave Function Receive Data Monitor
•
Slave Function Transmit Data Monitor/Test
•
Auto Configuration
•
Flash ROM Parameter Clear
•
Parameter Backup
MELSEC-Q
Reference
section
Section 6.4
6
Section 6.5
Section 6.6
6 - 1
Advertisement
Table of Contents
