10.6.5
Setting up and using SSH
You can use remote access to access devices from the PC system.
An SSH environment is pre-installed when installing PCU Base for IPC for Windows 10. You
can log on with PuTTY.
You can use an SSH key to log on. A script for setting up the infrastructure on devices is
provided. However, for security reasons no previously generated keys have been stored.
Further information: Encryption via SSH protocol (Page 276)
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
Installing and setting up PCU Base for IPC
10.6 Remote access for diagnostics
275