Handling Of Blocks And Libraries; Use And Handling Of Groups - Siemens SINUMERIK MC Commissioning Manual

5.4.6

Handling of blocks and libraries

5.4.6.1

Use and handling of groups

In the Program blocks folder in the project tree, you can call the command "Add new group" in
the shortcut menu to create groups to organize your program blocks.
For example, this function is useful in the following situations:
● Creating a dedicated group for the blocks of the basic program and of the user program.
This allows you to individually display the editable blocks of the user program.
● Organizing specific related program blocks (e.g. axis DBs).
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
PLC commissioning
5.4 Creating a PLC program
81