Installing and setting up PCU Base for IPC
10.3 Configuration of the system
6. In the "New Inbound Rule Wizard" dialog, select the option button "Predefined", select in the
"File and Printer Sharing" drop-down list, and click on "Next".
7. Depending on the network profile (e.g. Public or Domain) for which the file and printer
release is to be activated, check the corresponding checkbox.
8. Click on "Next".
9. Select the option button "Allow the connection" and click on "Finish".
216
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB