Table of Contents
Advertisement
Requirements for commissioning
3.7 Access levels
Change password
Procedure:
1. To change the default password from the delivery condition, press the "Change password"
softkey.
2. The previous password must first be confirmed. After successful authentication, you are
forwarded automatically to the following dialog:
3. Enter the new password and the repetition, and then confirm with the "OK" softkey. If both
passwords match, the new password becomes valid and is adopted by the system.
40
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
Advertisement
Table of Contents
