Table of Contents
Advertisement
Procedure
To establish a communication connection between two devices, proceed as follows:
1. In the "Online" menu, select the "Accessible nodes" command.
2. In the drop-down lists "Type of PG/PC interface" and "PG/PC interface", search for the
interface used.
If no devices are accessible at an interface, the connecting line between the PG/PC and the
device is interrupted. If devices are accessible, the connecting line is shown, and the
accessible nodes at the selected interface of the PG/PC are displayed in a list.
Note
The PC system is also displayed as a communication node.
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
PLC commissioning
5.3 Configuring the PLC
57
Advertisement
Table of Contents
