Table of Contents
Advertisement
Installing and setting up PCU Base for IPC
10.3 Configuration of the system
General information
General information on the file and printer release in Windows
In Windows, there are basically settings for the file and printer release at two different locations:
In the settings of the corresponding network adapter and in the Windows Firewall settings.
● In the Windows Firewall settings, the file and printer release is at least partially blocked:
– The Windows Firewall is deactivated in the plant network, however, which allows access
– In the company network, the Windows Firewall is activated and the file and printer
These settings can be changed in various dialog boxes, e.g. in the "Network and Sharing
Center" or in the "Allowed apps" dialog box.
● In the settings of the network adapter for the plant network, the file and printer release is
activated. However, in the settings of the network adapter for the company network, the file
and printer release is deactivated. This setting primarily takes effect prior to the general
setting of the Windows Firewall.
This can be seen in the corresponding Windows Firewall settings dialogs by means of a
partially activated checkbox (green or gray background).
Further information
Further information on file and printer sharing is provided in Microsoft Windows support
support.microsoft.com/en-us/hub/4338813/windows-help?os=windows-10).
General activation for all network profiles
Via the Control Panel
There are several procedures for activating the file and printer release for all of the network
profiles in the Windows Firewall. (For example, there is the alternative procedure via the
"Network and Sharing Center" under "Change advanced sharing settings").
212
to USB flash drives and external hard disks.
release is blocked by the Windows Firewall.
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
(https://
Advertisement
Table of Contents
