Siemens SINUMERIK MC Commissioning Manual page 238

Installing and setting up PCU Base for IPC
10.4 Installing and configuring updates and automation software
Section Setting
[setupdirs_ deleteTmpLocal
settings] SetupDirs=
keepDInstall
SubdirsWithPrefix=
[setupnames] NAME001=
NAME002=
...
[setupexecution] checkSetupLogFile=
copyToTmp
LocalSetupDir=
[noactivation] APP001=
APP002=
238
Description
Temporary directories are created during installation of a setup from a removable data
storage medium, network drive or the default setup directory D:\Install
Further information: Procedure example of an installation with the PCU Installer
(Page 241)
Here you can specify whether these temporary directories are to be deleted again after
installation.
Possible values: yes; no
You can specify that subdirectories of D:\Install with a particular prefix in the
directory name are not to be deleted after setup is completed.
Specifies which files are setup packages and are to be included in the check of setup
directories.
You can specify entire file names with their file extensions or represent individual parts
of them with wildcard character *.
Specifies whether a check is to be performed as to whether the file has already been
installed before the installation of a setup file.
The check is performed based on the computer name and the setup name of the setup-
specific log file.
Possible values: yes; no
You can specify whether setup files on removable data storage media are to be copied
to a temporary, local directory before installation.
Setup files on network drives are always copied before installation.
Possible values: yes; no
Specifies which applications of the PCU Installer are inactive during operation.
This setting is required to prevent operation of the HMI software or another application
from being interrupted during execution of a setup.
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB