Table of Contents
Advertisement
Procedure
To permit incoming SNMP communication on the Siemens PC system, proceed as follows:
1. Enter "Control Panel" in the search field and then click on "Control Panel" in the search
results.
The desktop App "Control Panel" opens.
2. Click on the display selection and switch from the "Category" view to "Icons".
The "All Control Panel Items" dialog box opens.
3. Click on "Windows Defender Firewall" > "Allow a app or feature through Windows Defender
Firewall".
The "Allowed apps" dialog box opens. The various checkboxes for "SNMP Service" are
checked and displayed with a green or gray background, because the SNMP service is
partially activated: Incoming queries are blocked on the Siemens PC system and outgoing
queries from the PC system are permitted.
4. Click on "Change Settings" and confirm with "Yes", if applicable.
5. Activate the checkbox of the corresponding network profile completely, e.g. "Public" for the
company network (factory setting).
6. Click "OK" to confirm the change.
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
Installing and setting up PCU Base for IPC
10.3 Configuration of the system
207
Advertisement
Table of Contents
