Siemens SINUMERIK MC Commissioning Manual page 252

Installing and setting up PCU Base for IPC
10.5 Backing up and restoring data
3. Make the required settings here:
4. Confirm your settings with "Backup" to start generation of the disk image.
252
Section Setting
Base parame‐ Ghost version
ters
Source disk
Destination file
Base parame‐ Connect share
ters > Destina‐
tion file
Select destina‐
tion
Optional pa‐ Split image size Split the disk image and select a split image size.
rameters
Compatible file
naming system
Compress im‐
age
Purpose
Select the Symantec Ghost version that is to be used when
creating the disk image:
● Version for Windows 10: "Ghost version 12.0.x"
● Version for Windows 7: "Ghost version 11.5.x"
● Version for Windows XP: "Ghost version 8.2.x"
Select a data storage medium of which you want to create a disk
image.
Specify the target directory and file name.
Disk images can be stored either locally or in the network.
Open the "Connect a Share" dialog box (Page 258).
You can set up a shared resource (e.g. a directory in the net‐
work), to which you can store the disk image.
Open the "Select Destination File" dialog box.
You can navigate through a local directory of the PC system and
enter a file name.
You can split the disk image into several files of a defined size.
Split the disk image size in the following cases:
● If the file system (e.g. FAT32) can only manage files of a
certain size.
● If the disk image is to be archived onto multiple data storage
media, for example, when using CDs.
Select the compatibility of the name scheme.
This option is required so that a disk image with older versions
of the "PCU-Basesoftware Windows XP" can be read in by Win‐
dows XP.
It is not possible to use a different operating system on a Sie‐
mens PC system other than the pre-installed system (e.g. Win‐
dows XP running on a Windows 10 IPC).
Activate Compression or select a compression level.
Higher compression results in a smaller file size, but increases
the time needed to compress or decompress the data.
Commissioning Manual, 02/2020, A5E47437618B AB
MCU commissioning: NC, PLC, Drive