Table of Contents
Advertisement
10.5.12.5
Release directory of the PC/PC in the network
If you want to, for example, store disk images on a PG/PC that you have linked to the Siemens
PC system via the network, set up a network drive.
As soon as it has been set up, a new drive will appear on the PC system, which is really a
directory on the PG/PC.
The basic procedure for setup under Windows 10 or Windows 7 is described below. Further
information from Microsoft is in the Internet: Microsoft Windows support
support.microsoft.com/en-us/hub/4338813/windows-help?os=windows-10)
Precondition
● The PG/PC is switched on.
● There is sufficient free space on the PG/PC, to save disk images of the PC system, for
example.
● The user accounts to which you want to grant share rights are known in the domain or on the
Siemens PC system.
Procedure
Proceed as follows to share a directory for use in the network:
1. On the PG/PC, in the Control Panel call up Computer Management.
2. Under "System > Shared Folders" select the file "Shares."
3. In the "Action" menu, click the "New File Share..." command.
The "Create A Shared Folder Wizard" opens.
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
Installing and setting up PCU Base for IPC
10.5 Backing up and restoring data
(https://
267
Advertisement
Table of Contents
