Table of Contents
Advertisement
Installing and setting up PCU Base for IPC
10.3 Configuration of the system
By prompt, script or batch file
Basic procedure
With a command according to the following scheme, you can allow the file and printer release
in the company network for all of the network profiles together. All of the firewall rules of the
group "File and Printer Sharing" are changed for all network profiles.
To do this, call the prompt as the administrator and enter the command either completely or
successively.
Alternatively, you can save the command and the associated parameters in a script file
(Page 205).
Syntax for activating a group of firewall rules via the prompt
netsh advfirewall firewall set rule group="<group name>" new enable=yes
Table 10-9
Com‐
mand
netsh
adv‐
firewall
firewall
set
rule
Example
Activation of the firewall rule "File and printer release" for the "Public" profile.
netsh advfirewall firewall set rule group="File and Printer Sharing" new enable=yes
214
Description of the Netsh commands in the context of the advfirewall firewall
Parameter
Description
Specification of the command line pro‐
gram, which executes the following
commands.
Defines the context in which the follow‐
ing commands are to be carried out.
Subcontext of "advfirewall".
Adaptation of existing firewall rules.
group
Name of the group with firewall rules
new
Specifies that the following parameters
are to be changed or added.
enable
Activates or deactivates the specified
group of firewall rules.
Value
-
-
-
-
"File and Printer Sharing" | ...
-
yes | no
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
Advertisement
Table of Contents
