Table of Contents
Advertisement
Creating and importing archives using SINUMERIK Commissioning
8.3 Creating a DSF archive on SINUMERIK MC
8.3
Creating a DSF archive on SINUMERIK MC
Archives can be created in the normal way via the SINUMERIK Commissioning user interface.
The data backup is made as commissioning archive in the *.dsf format. A commissioning
archive can be generated, for example, after the control has been commissioned. To do this,
control components can be saved individually or jointly. It is also possible to transfer the data
backup to other controls so they can be updated to the same status.
The following archive types can be selected for the data backup:
All data of this machine (backup)
● Complete backup for restoration
● Complete backup for software upgrades
Data for a machine series (Setup)
● Data inventory for equipping a machine series
The archive does not contain specific machine data, such as
tools, part programs, address settings, compensations, PLC remanent data, workpiece
counters, etc.
Factory setting of this machine (original)
● Data backup at a defined storage location
Note
We recommend that a backup archive is created regularly for specified work states of the
SINUMERIK MC environment so that a required state can be reproduced whenever necessary.
Note
Restriction
An original archive is represented as backup.
Precondition
● Access level "User" is required to create a backup (backup of the same control).
● Access level "Manufacturer" is required to create a setup or original.
166
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
Advertisement
Table of Contents
