Siemens SINUMERIK MC Commissioning Manual page 146

NC commissioning
7.1 Machine and setting data
Effectiveness
The effectiveness of a machine data item specifies when the change becomes active:
po
re
cf
so
Changes to the setting data always take effect immediately.
Further information
A description of the machine data and setting data is provided in the
SINUMERIK MC Machine Data List Manual
146
The SINUMERIK Operate Online Help provides a context-related description of the
machine data and setting data.
The changed machine data require an "NCK Reset" to become effective.
The changed machine data must be activated by pressing the <RESET> key.
The changed machine data must be activated by pressing the "Apply MD" softkey.
The changed machine data becomes active immediately.
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB