Table of Contents
Advertisement
PLC commissioning
5.4 Creating a PLC program
Procedure
Proceed as follows to copy the PLC data types into your project:
1. Switch to the "Libraries" task card and open the system library "SINUMERIK MC PLC Basic
Program V1.13.0.0", for example.
2. Drag the folder "Copy templates > Motion Control PLC Basic Program > Motion Control PLC
BP data types" into folder "PLC data types" of your project (e.g. under "MCU_1 > PLC_1 >
PLC data types").
Result
The data types were copied into your project and assigned to the corresponding blocks of the
basic PLC program.
72
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
Advertisement
Table of Contents
