Siemens SINUMERIK MC Commissioning Manual page 266

Installing and setting up PCU Base for IPC
10.5 Backing up and restoring data
Procedure
To configure the network settings of the PG/PC for connecting a PC system in the system
network, proceed as follows:
1. Open the "network connections" window:
– To do this under Windows 7: in the Control Panel in category "Network and Internet
– To do this under Windows 10: enter "Control Panel" in the search field, then click on
2. Right-click on the network adapter you want to configure, then in the shortcut menu click on
"Properties".
Dialog "Properties of <connection>" opens.
Figure 10-20
3. Make the following settings:
– Click "File and Printer Sharing for Microsoft Networks."
– To change the IP address of the PG/PC, double-click "Internet Protocol Version 4 (TCP/
Result
The network settings of the PG/PC are now configured for use with the Siemens PC system.
266
> View network status and tasks," choose "Change adapter settings".
"Control Panel > Network and Sharing Center > Change Adapter Settings".
Properties of <connection>
IPv4)", then configure the settings as follows:
Section
Use the following IP ad‐
dress
Element Setting
IP address The following IP addresses in the system net‐
work can be used for the PG/PC:
● 192.168.214.250
● 192.168.214.251
● 192.168.214.252
● 192.168.214.253
● 192.168.214.254
Subnet mask
● 255.255.255.0
Commissioning Manual, 02/2020, A5E47437618B AB
MCU commissioning: NC, PLC, Drive