Siemens SINUMERIK MC Commissioning Manual page 224

Installing and setting up PCU Base for IPC
10.3 Configuration of the system
Alternatively, you can save the commands and the associated parameters in a script or batch
file (Page 205).
Syntax of the Netsh commands for defining the policy memory and for exporting the policy file
netsh advfirewall set store local
export <File path and file name>.wfw
Table 10-12 Description of the Netsh commands for defining the policy memory and for exporting the
Com‐
mand
netsh
adv‐
firewall
set
store
export
Example
Example of the Netsh commands for defining the policy memory and for exporting the policy file
netsh advfirewall set store local
export D:\Backup\DefaultSettings.wfw
Restoring of firewall settings
Via the Control Panel
Procedure
Note
Importing a policy file overwrites all existing firewall rules
When the firewall settings are restored, all of the existing firewall rules are overwritten. You
cannot undo the import of firewall rules via a policy file.
Therefore, back up (export) the existing firewall settings before you import a policy file.
224
policy file
Parameter Description
Specification of the command line pro‐
gram, which executes the following
commands.
Defines the context in which the follow‐
ing commands are to be carried out.
Definition of the save location of the pol‐
icy memory for the following commands.
local Defines that the work is to be done with
the local policy memory.
Backup of all firewall settings in a policy
file (.wfw).
Value
-
-
-
-
<File path and file name>.wfw
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB