Table of Contents
Advertisement
Installing and setting up PCU Base for IPC
10.5 Backing up and restoring data
10.5.3
Functions of the Service Center
Overview
In the upper section of the Service Center main menu, you can select one of five tasks. Buttons
for additional functions are available in the lower section.
Figure 10-8
Table 10-16 Functions in the main menu of the Service Center
Element of the window
Disk Backup
Disk Restore
Partition Backup
Partition Restore
Log Files
About
Shell
246
Service Center - Main menu
Purpose
Create a disk image of the local SSD.
With this command, you can create a disk image of the entire SSD (with all partitions).
Restore the local SSD with an existing disk image.
With this command, you can restore the complete SSD (with all partitions) with a previously created disk
image.
Create a disk image of a partition on the local SSD.
With this command, you can create a disk image of an individual partition of the SSD.
Restore a partition on the local SSD with a disk image.
With this command, you can restore an individual partition of the SSD with a previously created disk image.
View and save log files.
Viewing information about the Service Center.
Open the Prompt.
Here you can enter commands for executing tasks on the PC system without using a graphic user interface.
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
Advertisement
Table of Contents
