PLC commissioning
5.2 Starting the TIA Portal
5.2
Starting the TIA Portal
Precondition
● TIA Portal V16 has been installed.
● SINUMERIK MC STEP 7 Toolbox V16 has been installed.
Procedure
1. Start the TIA Portal by double-clicking the link to the Windows desktop or from the Start
menu under "All Programs > Siemens Automation > TIA Portal V16".
Result
The TIA Portal opens. The functions of a SINUMERIK MCU are now available to you in the TIA
Portal.
50
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB