Table of Contents
Advertisement
Installing and setting up PCU Base for IPC
10.5 Backing up and restoring data
4. Under step "Name, Description, and Settings," make a note of the Share path, which is a
combination of the computer name and the share name. You will have to specify this name
when you create a link to the network drive on the Siemens PC system.
Figure 10-21
268
Create A Shared Folder Wizard - Name, Description, and Settings
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
Advertisement
Table of Contents
