Table of Contents
Advertisement
Commissioning NC-controlled drives
6.3 Commissioning drives via device master files
You can edit the Ti/To values in "Manual" mode.
Checking settings for the sync domain
A sync domain is needed to synchronize PROFINET IO devices. To check the assignment of
the device to the sync master and sync slave and other sync domain settings, proceed as
follows:
1. Switch to the network view.
2. Select the PN/IE connection between the control and the drive.
The connection settings are displayed in the Inspector window.
138
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
Advertisement
Table of Contents
